How To Thread A Bobbin On A Sewing Machine In 2022

Before you can start sewing with a bobbin, you need to thread it onto the sewing machine. This article will help you understand how to thread a bobbin on a sewing machine.

The process of threading a bobbin on a sewing machine is different for each type of machine, so it is important to consult your machine’s manual before getting started. In general, however, the process typically involves inserting the bobbin into the bobbin case and then pulling the thread through a series of tensions.  

Once the bobbin is threaded, you can insert it into the sewing machine and start sewing. With a little practice, you’ll be able to thread a bobbin on your sewing machine in no time. 

Many sewing machines come with an automatic needle threader. This makes it quick and easy to thread the needle, but you still need to know how to thread the bobbin. To start, locate the bobbin case. Read on to know all about it. 

STEPS: How To Thread A Bobbin On A Sewing Machine 

Sewing machines are a great way to create beautiful projects. One essential part of sewing is threading the bobbin. If the bobbin isn’t threaded correctly, your project will not turn out as you want it to.

In this blog post, we will show you how to correctly thread a bobbin on a sewing machine.

1. Loading The Spool Pin 

 
If you have a spool cap, place the thread on the upper pin and hold it there until you need it for the bobbin. Some machines have a small piece of felt, foam, or a plastic cone that can be left under the spool pin to help stop excess vibration. 

2. Threading Machine Guides 

It may look like a button or disk if you pull the thread through the guide specified in your sewing machine manual. This causes tension on the thread before the bobbin. The thread ought to be wrapped in the correct direction. 

3. Threading The Bobbin 

If there is a hole in the side of the bobbin, thread the hole from the inside to the outside of the bobbin and place the bobbin on the bobbin winding machine.

The sides of the bobbin should be solid, and if they are then you need to wind the thread around the bobbin a few times and place the bobbin on the spindles. Now just leave enough loose thread so that you can give yourself a tail to hold while winding. 

4. Engaging The Bobbin Winding 

 
The sewing machine’s bobbin-threading mechanism must be engaged for the thread to be wound on the bobbin. You need to engage the bobbin winding in one way or another if you want your machine to work. 

The brake will probably move towards the bobbin that is about to be wound. To engage the winding process on your sewing machine, the center of the handwheel at the end of the machine might need to be loosened. 

5. Winding The Bobbin 

If you leave a machine unattended, hold onto the thread tail and power the machine with the foot pedal or start button. Once the loose tail is secured and trimmed, you can either pause winding or let the thread tail go on the bobbin. 

Most machines will stop winding automatically when the thread fills the bobbin if the brake is set correctly. The initial thread needs to be trimmed if it is loose so that the thread does not cause tangles when sewing. 

6. Inserting The Bobbin 

Refer to your sewing machine manual for instructions on how to put the bobbin into the sewing machine.  

• In machines with a vertical bobbin, you need to insert the bobbin as instructed and remove the bobbin case. Then pull the thread out through the slot, and then you need to guide the side of the case to the outer. The thread should be pulled to make sure the bobbin spins in the correct direction. 
• There are machines that have a horizontal, drop-in bobbin. The needle plate needs to be removed and the bobbin needs to be inserted. The thread needs to be pulled. 

The upper thread has to be threaded correctly in order to form stitches with the bobbin thread. 

How To Know If My Bobbin Is Threaded Correctly? 

Generally, you will know if your bobbin is threaded correctly and if your sewing machine is functioning properly. If you are having issues with your machines, such as skipped stitches or bird nesting, it could be a sign that your bobbin is not threaded correctly. 

1. Start by finding the shuttle hook on your sewing machine. This is the part of the machine that holds the bobbin. 

2. On most machines, there will be a small door or plate that you can open to access the shuttle hook. Open this door and insert your bobbin so that the thread is wrapped around clockwise. 

3. Once the bobbin is in place, pull the thread through the tension spring and then through the slot in the needle plate. 

4. Cut off any excess thread and close the door or plate. 

5. Finally, turn your sewing machine’s handwheel to raise the needle. The thread should now be pulled through the entire machine and should emerge from the needle. If it doesn’t, check your bobbin again to make sure it is threaded correctly. 

FAQs: How To Thread A Bobbin On A Sewing Machine 

Final Words 

So there you have it, our step-by-step guide on how to thread a bobbin on a sewing machine. We hope you found this article helpful and that it has answered any questions you may have had about the process.

If not, feel free to leave us a comment below and we will do our best to get back to you as soon as possible. Thanks for reading!